Laboratory Mixers
LABORATORY SCALE MIXER L5M-A
Capacity
1ml up to 12 litres.
Motor Unit
Robust two-piece designed for cool, quiet and continuous operation.
Motor
Maximum speed 10.000 rpm (6000 rpm under full load).
L5M-A: 750W (1 hp) 220 volt, single phase (110 volt optional) 50/60 Hz.
Speed Control
Infinitely variable electronic speed control with integral on/off switch.
Electric Rise & Fall Bench Stand
The mixing unit may be effortlessly raised and lowered using the push-button control on the motor unit.
Construction
All wetted parts are in grade 316 stainless steel with the exception of the bush, which may be bronze alloy or PTFE.
L5 Series mixers are finished in a tough, easy-to-clean, non-chip white nylon coating. The flat base is covered by a removable non-slip mat, which is resistant to most solvents.
Assemblies
Over 40 heads available.
LABORATORY IN-LINE MIXERS VERSO
The Silverson Verso is a bench top In-Line mixer ideal for laboratory or pilot scale applications. The unit offers excellent reproducibility when scaling up and provides an accurate and easy means of forecasting the performance of larger In-Line mixers under full-scale working conditions.
The Verso is equipped with a digital tachometer, ammeter and programmable timer, invaluable for applications where process validation and reproducibility are required. It is also compatible with the Silverson “DataLogger” program.
Features:
-
Touch pad control panel
-
Powerful 1 hp (0.75 kW) motor with infinitely variable speed control
-
Single or multistage interchangeable workheads available
-
Self-pumping
-
Maximum operating pressure 150 psi (10 bar)
-
0.75” Tri-clamp inlet/outlet connections
-
Single mechanical shaft seal
-
All wetted parts are in grade 316L stainless steel
-
Sanitary construction
-
Amperage display
LABORATORY IN-LINE MIXERS VERSO
The Silverson Verso is a bench top In-Line mixer ideal for laboratory or pilot scale applications. The unit offers excellent reproducibility when scaling up and provides an accurate and easy means of forecasting the performance of larger In-Line mixers under full-scale working conditions.
The Verso is equipped with a digital tachometer, ammeter and programmable timer, invaluable for applications where process validation and reproducibility are required. It is also compatible with the Silverson “DataLogger” program.
Features:
-
Touch pad control panel
-
Powerful 1 hp (0.75 kW) motor with infinitely variable speed control
-
Single or multistage interchangeable workheads available
-
Self-pumping
-
Maximum operating pressure 150 psi (10 bar)
-
0.75” Tri-clamp inlet/outlet connections
-
Single mechanical shaft seal
-
All wetted parts are in grade 316L stainless steel
-
Sanitary construction
-
Amperage display
LABORATORY SCALE POWDER/LIQUID MIXER FMX5
The new Silverson FMX5 is a laboratory scale version of the Flashmix powder/liquid mixer.
Incorporating powders into liquids is one of the most problematic of mixing applications, and this can be as much of a challenge in the laboratory as it is in full scale production, particularly with difficult powders such as gums and thickeners.
The FMX5 provides a simple, effective and hygienic means of powder/liquid mixing on a laboratory scale and is ideal for higher viscosity mixes.
Features:
-
Powerful 1 hp (0.75kW) single phase motor with infinitely variable speed control.
-
All wetted parts are in grade 316L stainless steel.
-
Touch pad control panel with digital tachometer, programmable integral timer and amperage display.
-
Interchangeable rotor/stator arrangements.
-
1 liter stainless steel hopper as standard; other types are available to assist with flow of more cohesive powders.
-
Typical batch size up to 10 liters, depending on viscosity.
PILOT SCALE MIXER AX SERIES
The AX series of mixers is a small scale production unit widely used in industry, pilot scale plants and research institutes, etc. These mixer models have a capacity of up to 50 litres.
► AX5
The AX5 features touch pad controls and is compatible with Silverson’s “DataLogger” system.
Motor
Powerful 0.75 kW (1 hp) 220 volt single phase motor (110 volt optional) 50/60 Hz.
Speed Control
Infinitely variable speed control. Nominal maximum speed 6000 rpm.
Electric Rise & Fall Stand
The unit features an integral rise and fall stand with touch pad controls.
► AX3
The Model AX3 features a fixed speed 0.25kW (0.33hp), 3 phase, IP55/
Hoseproof, TEFV or ATEX approved Flameproof industrial motor. Variable speed available via an inverter as an optional extra.
More powerful motors allowing a maximum speed of up to 6000 rpm also available.
► AX/Air
The Model AX/Air is powered by an
intrinsically safe compressed air motor suitable for use in Atex Zoned/
Explosion Hazard areas.
Bench stand
Spring assisted or electric rise and fall bench stands are available for use with the AX3 and AX/Air models.
Browse Our Products
